If you participate in the IT exam, you should not hesitate to choose Passtcert JN0-661 Service Provider Routing and Switching. For the vital interests of the majority of candidates, Passtcert is absolutely trustworthy.If you are still struggling to get the Juniper JN0-661 exam certification, Passtcert will help you achieve your dream. Passtcert JN0-661 Service Provider Routing and Switching are the best training materials. We can provide you with a good learning platform.
Share some JNCIP-SP JN0-661 exam questions and answers below.
What is the final component of CoS processing on a Junos device?
A. drop profile map
B. behavior aggregate classifier
C. rewrite marker
D. multifield classifier
Answer: C
Click the exhibit button
Referring to the exhibit, which router will be the RP?
A. R4 for all groups
B.R1 for group 224.1.1.11 and R4 for all other groups
C.R1 for all groups
D.R4 for group 224.1.1.12 and R1 for all other groups
Answer: A
Which statements are true about NG MVPNs? (Choose two.)
A. NG MVPN membership is signaled between PEs using PIM?
B.Every NG MVPN PE router builds a selective provider multicast service interface tunnel to every other router in the same NG MVPN
C.NG MVPN membership is signaled between PEs using MP-BGP.
D.Customer multicast traffic can be transported over the provider network using point-to-multipoint MPLS LSPs.
Answer: B, D
Which 0SPFv3 router ID is valid?
A.192.168.1.1
B.:;192.168.1.1
C.0.0.0.0
D.2008:db800::1
Answer: A
Click the Exhibit button
You want to advertise routes 2.0.0.0/8 and 2.6.6.6/32 to BGP peer 192.168.11.0. Referring to the exhibit, which configuration change would satisfy this requirement?
A.Delete the as1000 export policy.
B.Change the as1000 policy to orlonger.
C. Delete the reject export policy.
D. Change the reject policy to longer.
Answer: B
You are connecting your OSPF router to your customer's RIP router and redistributing the customer's routes into your OSPF domain. Your OSPF routes is part of an NSSA and the ABR is injecting an OSPF default route, which you have advertised to your customer After committing the configuration, you notice a routing loop between your OSPF router and the customer's RIP router
Which action must you perform on your OSPF router to solve this problem?
A.Enable Type 7-to-Type 5 LSA conversion.
B. Set the customer-facing interface to passive.
C. Convert the area to a stub area
D. Change the OSPF external route preference.
Answer: D
Click the Exhibit button
You must ensure that r1's IPv4 loopback address exists in r3's inet 0 routing table
Referring to the exhibit, which statement is true?
A.An IPv4 unicast realm can be enabled on each router.
B.A policy can be configured on M to redistribute 172.16.100.1/32 into OSPFv2, which would cause r3 to eventually learn the route and place it into inet0.
C.A RIB group can be configured on r3 to copy that route into inet 0 because 172.16.100.1/32 exists in r3's inet6.0 table
D.A policy can be configured on r1 to redistribute 172 16 100 1/32 into OSPFv3, which would cause r3 to eventually learn the route and place it into inet 0.
Answer: C
If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the Juniper JN0-661 exam. You can use Passtcert JN0-661 Service Provider Routing and Switching. The training materials of Passtcert are the product that through the test of practice. Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results.Passtcert have a strong It expert team to constantly provide you with an effective training resource.
Passtcert can provide you with a very high accuracy of exam preparation. Selecting Passtcert JN0-661 Service Provider Routing and Switching can save you a lot of time, so that you can get the Juniper JN0-661 certification earlier to allow you to become a Juniper IT professionals.If you do not know how to pass the exam more effectively, I'll give you a suggestion is to choose a good training site. This can play a multiplier effect. Passtcert site has always been committed to provide candidates with a real JNCIP-SP JN0-661 certification exam training materials.
Share some JNCIP-SP JN0-661 exam questions and answers below.
What is the final component of CoS processing on a Junos device?
A. drop profile map
B. behavior aggregate classifier
C. rewrite marker
D. multifield classifier
Answer: C
Click the exhibit button
Referring to the exhibit, which router will be the RP?
A. R4 for all groups
B.R1 for group 224.1.1.11 and R4 for all other groups
C.R1 for all groups
D.R4 for group 224.1.1.12 and R1 for all other groups
Answer: A
Which statements are true about NG MVPNs? (Choose two.)
A. NG MVPN membership is signaled between PEs using PIM?
B.Every NG MVPN PE router builds a selective provider multicast service interface tunnel to every other router in the same NG MVPN
C.NG MVPN membership is signaled between PEs using MP-BGP.
D.Customer multicast traffic can be transported over the provider network using point-to-multipoint MPLS LSPs.
Answer: B, D
Which 0SPFv3 router ID is valid?
A.192.168.1.1
B.:;192.168.1.1
C.0.0.0.0
D.2008:db800::1
Answer: A
Click the Exhibit button
You want to advertise routes 2.0.0.0/8 and 2.6.6.6/32 to BGP peer 192.168.11.0. Referring to the exhibit, which configuration change would satisfy this requirement?
A.Delete the as1000 export policy.
B.Change the as1000 policy to orlonger.
C. Delete the reject export policy.
D. Change the reject policy to longer.
Answer: B
You are connecting your OSPF router to your customer's RIP router and redistributing the customer's routes into your OSPF domain. Your OSPF routes is part of an NSSA and the ABR is injecting an OSPF default route, which you have advertised to your customer After committing the configuration, you notice a routing loop between your OSPF router and the customer's RIP router
Which action must you perform on your OSPF router to solve this problem?
A.Enable Type 7-to-Type 5 LSA conversion.
B. Set the customer-facing interface to passive.
C. Convert the area to a stub area
D. Change the OSPF external route preference.
Answer: D
Click the Exhibit button
You must ensure that r1's IPv4 loopback address exists in r3's inet 0 routing table
Referring to the exhibit, which statement is true?
A.An IPv4 unicast realm can be enabled on each router.
B.A policy can be configured on M to redistribute 172.16.100.1/32 into OSPFv2, which would cause r3 to eventually learn the route and place it into inet0.
C.A RIB group can be configured on r3 to copy that route into inet 0 because 172.16.100.1/32 exists in r3's inet6.0 table
D.A policy can be configured on r1 to redistribute 172 16 100 1/32 into OSPFv3, which would cause r3 to eventually learn the route and place it into inet 0.
Answer: C
If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the Juniper JN0-661 exam. You can use Passtcert JN0-661 Service Provider Routing and Switching. The training materials of Passtcert are the product that through the test of practice. Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results.Passtcert have a strong It expert team to constantly provide you with an effective training resource.
Passtcert can provide you with a very high accuracy of exam preparation. Selecting Passtcert JN0-661 Service Provider Routing and Switching can save you a lot of time, so that you can get the Juniper JN0-661 certification earlier to allow you to become a Juniper IT professionals.If you do not know how to pass the exam more effectively, I'll give you a suggestion is to choose a good training site. This can play a multiplier effect. Passtcert site has always been committed to provide candidates with a real JNCIP-SP JN0-661 certification exam training materials.
Comments
Post a Comment